<aside> ⚠️ Before using the touch probe you must verify the connection.

</aside>

Please go into the SETUP tab

Press enter to bypass the password dialog blank (there is no password)

Scroll down using the scroll bar until you get to the Input 12: Probe

Then touch the metal part of the clamp to the probe. You can also clip it to your tool and touch the probe to the tool.

In the Jog & Probing tab you can enter the probing dialog box:

<aside> ⚠️ Ensure your Bit size is correctly entered in the Probe Diameter box

</aside>

Then you can place the probing tool on your part and find X,Y, and/or Z