Safety Checkout Video

https://share.mindstamp.com/w/vGqjRESgsSLL

We currently have a 2.2kW water cooled spindle that is capable of 24000 RPM on a 120V 30 Amp outlet.

We have a set of ER20 Collets that will accept up to a 1/2” shank

Maximum Feedrate 400 Inches Per Minute

XY Travel Maximum is 48.031 inches or 1219mm

Member Notes from the Safety Video:

Courtesy @Anonymous (If it doesn’t load click the View Original in the upper right corner)

Courtesy @Anonymous (If it doesn’t load click the View Original in the upper right corner)

How to do an Air Pass/Dry Run

<aside> 💡 How to do an Air Pass on the Onefinity CNC Router

</aside>

How to use the touch probe:

<aside> 💡 How to use the Touch Probe on the Onefinity CNC

</aside>

Milling/Carving Bits

<aside> ⚠️ You must purchase your own router/milling bits for use on the machine.

</aside>

We do not have loaner bits. There are a ton of really good bits on the market but we found a good supplier of middle of the road bits are Spetool:

Choose The Best CNC Router Bits for Your Project | spetools.com

A great starter set that will get you started in most projects is Their WD-2 set here: